...
| Info |
|---|
| If a time tracking site has both of these versions in use at the same time, there are further instructions on how to set them up in the Clock card settings in Tuntinetti guide's section Two different clock card devices used in the same working site. |
Deployment of the NFC Clock card device
...
- The device can be quickly reset by pressing down IN, OUT, A and F buttons simultaneously (Device with a screen: IN, OUT, 1 and RED). After the device has been reset it will turn back on automatically in few minutes. Usually the time is updated as well.
- The device can be turned off by pulling the power plug and pressing down IN, OUT, A, E and F buttons at the same time (Device with a screen: IN, OUT, 1, 2 and RED). The device can be turned back on by plugging it back in.
Task ID
Task ID can be numbers or letters, depending on which buttons the clock card device has (a number pad or a letter pad).
If the project is using tasks, the stamp ID is entered in the ID field in the task's information.
If projects have devices with numbers and devices with letters, they work better together if the basic setting Basic settings → Company's basic information → Other settings → Timecard's numpad is interpreted as alphabets is activated.
When this setting is active, numbers mean a letter in alphabethical order. 1=A and 2=B and so on. Instead of guiding the employees to stamp AB, guide them to stamp 12.